Laboratory thermopile Kepp Zonen radiation measurement equipment

NegociableActualización en12/21

modelo

Naturaleza del fabricante: Productores

Categoría de producto

Lugar de origen

Consulta en línea

Descripción general

The detector type of the laboratory thermopile Kepp Zonen radiation measurement device CA2 is the same as our CMP3 and CMP6 total radiation meters. Due to its limited viewing angle, it can be used to measure the radiation flux intensity of specific locations or light sources.

Detalles del producto

Laboratory thermopile Kepp Zonen radiation measurement equipment

CA2'sLaboratory thermoelectric stackThe detector type is the same as our CMP3 and CMP6 total radiation meters. Due to its limited viewing angle, it can be used to measure the radiation flux intensity of specific locations or light sources.

CA2 is sensitive to radiation ranging from 0.2 to 50 meters and has a viewing angle of 20 degrees for 90% of the received radiation. This is determined by a cylindrical brass shell containing a conical reflector. Detachable glass windows reduce convective effects and radiation losses, but limit the spectral range to 0.3-3 m.

Laboratory thermoelectric stackSuitable for control (such as ovens), school and technical research institute demonstrations, or optical laboratory benchmark measurements. The installation rod is matched with the standard optical test bench fixing clip. The terminal can be connected to bare wire or a 4mm banana plug.

实验室热电堆-Kipp Zonen辐射测量设备

Technical Specifications

spectral range	0.2 ~50 m
sensitivity	7 ~20 μV/W/m²
impedance	20 ~200
Expected output range	0 ~30 mV
Working irradiance	2000 W/m²
Response time (63%)	< 6 s
Response time (95%)	< 18 s
Installation pole	170 mm long x 10 mm diameter
Working temperature range	-40℃ ~+80℃
humidity range	0~100% non condensing 12 VDC VDC

understandLaboratory thermopile Kepp Zonen radiation measurement equipmentFor more details, please feel free to contact us!

Producto similar Recomendar